top of page

SP Fluid

الملدن المتفوق

consumption:

Depending on the concrete mix design and other parameters. Recommended Dosing Rate: Start with 0.2-1.1% per 1kg of cement and adjust according to performance.

Encapsulation:

30-220-1000kg Pail/Drum/ IBC

High performance special plasticizer for architectural and decorative concrete

optimum rheological properties 

SP Fluid is based on a special polycarboxylate, a group of mixtures originally designed for the production of so-called self-compacting concrete (SCC)

SP Fluid SP Fluid is specially developed for decorative and architectural concrete, artificial stone, terrazzo etc. with exposed aggregate, acid-etched, sand, shot-blasting, polished or other cured concrete surfaces, in order to enable the production of the most homogeneous concrete surfaces

And unified, reduced segregation.

Irregularities in aggregate distribution or surface appearance can be effectively avoided and the consistently high quality of the concrete surface is ensured. Thus, the combination of SP Fluid with exposed concrete (see Deactivator), with acid etched concrete (seeAcid gel) or sandblasted concrete surfaces, for example facade elements or similar architectural concrete is highly recommended.

With SP Fluid it is not necessary to change the mix design.

On the contrary: SP Fluid, with its powerful features and comprehensive functionality, has been developed especially for variable application variants. Despite being "essential" for the production of "semi-self-compacting" concrete, SP Fluid goes even a step further. By adapting the corresponding dosing rate levels, SP Fluid enables even the production of fully self-compacting, non-porous architectural concrete with conventional mix design.

Product characteristics:

  •  significantly improves the dispersion of cement particles, especially compared to "conventional" plasticizers.

  •   A homogeneous cement paste is formed with low frictional forces, which improves the workability of concrete.

  •  enables the production of self-leveling concrete, which can be produced without or with low vibration effort only.

  •  Concrete has a more homogeneous structure and does not tend to separate or bleed.

  •  With professional concrete mix composition, non-porous concrete surfaces and uniform coloring can be achieved.

Advantages:

• Optimized water reduction and flow characteristics

• Reduces segregation and can be used for conventional concrete mix designs.

• Creates a stable consistency and rheological properties of concrete, especially during variable production parameters.

• There is no longer a need to develop new special designs for self-compacting concrete (SCC).

• It leads to a homogeneous spread of aggregates.

• Problems in concrete surface can be efficiently avoided and high quality concrete surface guaranteed.

• An increase of +10.5% in elastic elastic strength and +2.5% in compressive strength of ARCON-Fluid + Plus was tested after 24 hours when compared to the predecessor ARCON-Fluid SCC.

Please note that it is always necessary to carry out trial tests that correspond realistically to the planned production process and application procedures.

Do you still have some questions?

bottom of page